4 - 6hp gain and very quiet. Sounds similar to stock muffler, deeper, meaty sound. Does not sound like aftermarket cans. You must put 1, (one), more hole in bellypan. With stock front section of exhaust you need NO fuel controller. This Muffler also works with Superchargers and Turbo applications with great results.
REV Limiter adjusting, 8500-9500 RMP options + / - Fuel mapping, call to consult set-up prior to shipping ECU All programming is done "In-House" ECU can be shipped with same-day turn around or re-programmed while in snowmobile. We can turn handle Bar Warmers "ON" to operate at 1000 RPM.We can also turn Temperature Gauge "ON"REV
Stock bore is 52mm, we bore to 59.8mm & install new throttle plate
Call for pricing.
Stock muffler, flow 182 CFM, modified 225
Direct bolt on Air Box with no modifications to the cosmetics, or appearance of the snowmobile.
The Air Box slides directly onto stock carb., flange and adapts to the front Air Box.
This Air box has produces 8-12hp on 800 carb., with a stock motor, with no down jetting.
This Air Box is a must as everyone knows the Air Box is holding back the 800R engine, especially after any modification to the engine or the exhaust systems.
$300.00
TORQUE MOTORSPORTS
1215 Hanwell Rd, Fredericton, New Brunswick, Canada 502-452-2777
SPEED TECHNOLOGY SWEDEN AB,
Stapelvagen 34d, 932 37, Ursviken, SWEDEN 004 676 677 8166
DUNN PERFORMANCE
19025 Timberland Drive, Howard City, MI, USA - Dave Dunn 616-299-6590
ST. ONGE RECREATION
65 Hart Drive, Barrie, Ontario, Canada - 705-733-2280
FELKER MOTOR SPORTS
1538 E Eiesnhower Blvd., Loveland, CO, USA - 970-667-1300
HOWARDS INC.,
10 Ice Mine Road, Coudersport, PA, USA - 814-274-9800
LOCKHARTS ODYSSEY
RR #1, Courtland, Ontario, Canada - 519-688-3278
GREATER VANCOUVER POWER SPORTS
Surry, B.C., Canada - 604-888-8700
This Kit lets you install a Triple in a REV frame.
The Engine Mount lets you adjust engine alignment.
For REV or ZX belts we suggest you install 440 Rubbers & Cross Shaft in your stock Mount Plate and install the Under Mount Stiffener Plate and Rubbers from the 440 REV.
DESCRIPTION PRICE
Torque Arm $180.00
Mount Kit & Frame Plate $730.00
Steering Clamp $60.00
Bumper Bracket $38.00
Pull Cord Mount $45.00
Belt Guard Mount $26.00
Coolant Tank $195.00
Lower Coolant Hose $32.99
Upper Coolant Hose $31.20
Lower Coolant Tank Hose $30.32
Coolant Hose Connector $8.00
Air Box & Fittings $440.00
Torque Stop Plate $28.50
Wiring (Call for pricing)
Jaws Pipes 809cc/1050cc- with or without Silencer - Call Jaws or Crank Shop to order directly
All pricing is subject to change due to our suppliers. All applicable Taxes, Shipping and Brokerage fees are not included in the above pricing and will be determined on the date of shipment and be added to all orders. All orders must be paid in full before leaving our facility.
The stock 03 REV 800 we Dyno tested made 135hp & 93lbs of torque.
When we ported the cylinders, added V-Force Reeeds & Air Box, it made 161hp & 104lbs of torque.
This Kit works with both DPM & standard REV engines.
(Send cylinders & rave assembly)
DESCRITPTION PRICE
Spring $35.96
Pins 21g $56.40
Base Gasket $20.96
Inner Head O-Ring $35.96
Pilots $12.00
Main $12.00
Air Box Kit $264.00
V-Force Reeds 349.95
Port Cylinders $800.00
Install Kit $504.00
Re & Re, Jet, Carbs., & install Air Box Kit
All pricing is quoted in Canadian Funds and is subject to change without notice, as per our suppliers. HST is not included in any of the above pricing and may be applicable. Any and all Shipping Costs & or Brokerage Fees are the customers responsibility and will be added to your invoice.
We Dyno tested @ 150hp in stock form (1997-2003)
Add Porting plus V-Force (stock pipes), we Dyno tested @ 165hp
Add Jaws pipes (CDI box for 99 or newer), we Dyno tested @ 185-188hp
All trial kits were Dyno tested with 91 Octane fuel.
Cylinders come with Jetting & Clutch set-up specs
DESCRITPTION PRICE
Cylinder Porting, fit power valves $1000.00
Jetting Stock Pipes / Clutching Stock Pipes $168.00
or
Jetting Jaws Pipes / Clutching Jaws Pipes $356.40
Jaws Pipes $1300.00
or
Jaws Pipes with Balance Cams $1400.00
CDI - call for pricing
Jet $180.00
Pins $56.40
Springs $35.97
Cam $78.00
All pricing is quoted in Canadian Funds and is subject to change without notice, as per our suppliers. HST is not included in any of the above pricing and may be applicable. Any and all Shipping Costs & or Brokerage Fees are the customers responsibility and will be added to your invoice.
DESCRITPTION PRICE
Intake Socket (3) $377.88
Rope Guide $25.76
Oil Tank $156.00
Oil Tank Cap $31.76
Oil Tank Grommet $3.20
Oil Float $14.48
Oil Sensor $25.76
Oil Filter $7.16
Oil Clamp Red (3) $2.40
Oil Clamp Green (5) $4.90
Bottom Coolant Hose $52.16
Back Coolant Hose $24.56
Mag Mount $115.86
PTO Mount $174.17
Rear Mount with Rubber Mount $202.63
Oil Tank & CDI Mount $144.00
Left Bumper Mount $95.94
Right Bumper Mount $95.94
Coolant Tank $192.00
Torque Arm Kit $180.00
Air Box Kit $60.00
Steering Shaft $90.00
Hose Guard $36.00
Bolt & Clamps $36.00
Plastic 90 $6.32
Brass 90 Bypass Fitting $8.39
Brass Straight Bypass Fitting $8.39
Short 90 Coolant Hose $7.68
Wiring Harness Kit $180.00
All pricing is quoted in Canadian Funds and is subject to change without notice, as per our suppliers. HST is not included in any of the above pricing and may be applicable. Any and all Shipping Costs & or Brokerage Fees are the customers responsibility and will be added to your invoice.
The stock 04 REV 800 we Dyno tested made 135hp & 93lbs of torque.
When we ported the cylinders, added V-Force Reeds & Air Box, it made 161hp & 104lbs of torque.
This Kit works with both DPM & standard REV engines.
(Send cylinders & rave assembly)
DESCRIPTION PRICES
Spring $35.96
Pins 21g $42.50
Base Gasket $20.96
Inner Head O-Ring $35.93
Pilots $12.00
Mains $12.00
Air Box Kit $264.00
V-Force Reeds $349.95
Port Cylinders $800.00
Install Kit $504.00
Head Modification $84.00
Re & Re cylinders, clean clutch & install Clutch kit.
Re: Jet carbs., & install Air Box.
All pricing is quoted in Canadian Funds and is subject to change without notice, as per our suppliers. HST is not included in any of the above pricing and may be applicable. Any and all Shipping Costs & or Brokerage Fees are the customers responsibility and will be added to your invoice.
$1050.00
$300.00
$275.00
$75.00
DESCRITPTION PRICE
Air Box with ignition adjustment $300.00
No fuel controller needed, 5-7hp gain
Temperature Sensor Relocation Kit $75.00
Clutch Kit $275.00
Cylinder Porting (18-20 hp gain) $800.00
This porting works with Bondi Air Box. ignition adjustment, stock Y-Pipe, Pipe and Muffler.
No Fuel controller needed.
Send cylinders and RAVE's.
All pricing is quoted in Canadian Funds and is subject to change without notice, as per our suppliers. HST is not included in any of the above pricing and may be applicable. Any and all Shipping Costs & or Brokerage Fees are the customers responsibility and will be added to your invoice.
Bondi Engines
1743 10th Line, Innisfil, Ontario L9S 3N6, Canada
Copyright © 2024 Bondi Engines - All Rights Reserved.
Powered by GoDaddy